 |
Categories |
 |
|
 |
Information |
|
|
|
|
|
Quick Find |
|
|
|
Manufacturers |
|
|
|
Our eBay Store |
|
|
|
SSL Secured by GeoTrust RapidSSL |
|
|
|
RSS Catalog Feed |
|
|
 |
|
|
|
| Welcome Guest! Would you like to log yourself in? |
|
PTI Pavement Repair Products is an Authorized Distributor of FLOMIX™ Flowable Asphalt Repair and FLEXSET™ Rapid Concrete Repair pavement repair materials. These advanced high performance urethane polymer materials allow for simple, quick, and cost-effective repair and restoration of concrete and asphalt without expensive material extraction, saving you money.
FloMix and FlexSet are absolutely unaffected by temperature, either softening or frost/thaw. Durable and long-lasting, FloMix and FlexSet permanently bond to the surrounding aggregate, sealing and restoring the repaired area. Repairs are precisely to grade without shrinkage or compaction, and blend in visually with the surrounding pavement. Repairs are completed in just minutes! and can be successfully applied at any temperature, including sub-zero repair.
Available in convenient 3 and 5-gallon Pre-Measured Kits, FloMix and FlexSet provide an easy to use, durable and long lasting cold patch solution. Engineered to withstand extremely heavy loads from commercial aircraft traffic, heavy truck traffic, and general highway use, FloMix and FlexSet also provide a simple and effective alternative for general purpose pavement repair and pavement preservation projects. Your repair is guaranteed to outlast the surrounding pavement!
|
 |
FLOMIX™ Flowable Asphalt Repair Kit
FLEXSET™ Rapid Concrete Repair Kit
FloMix Flowable Asphalt and FlexSet Rapid Concrete allow for the rapid repair of potholes and various types of pavement damage and aging that would normally require the removal of large sections of the asphalt or concrete pavement. Just remove excess dirt and debris from the surface and then pour. When applied the product has a 9 to 12 minute work time and a 1 hour cure time. Originally developed for NATO/USAF as a rapid runway repair material, FloMix and FlexSet have become an inexpensive alternative to traditional pavement repair and restoration procedures. This innovative, patent-pending process provides a modern solution for an age-old problem.
|
 |
FLOMIX™ and FLEXSET™: Advantages
Product Related
Simple application
Provides smooth high traction surface
Rapid cure time till usable by traffic
Odorless and vaporless
Seals and waterproofs
unaffected by water, fuels, oil, or solvents
Increases safety and minimizes traffic delays
Durable, long lasting repair restores without dig-out
Stable, unaffected by temperature cycles, either softening or frost/thaw
Repairs precisely to grade without shrinkage or compaction
Very high flexural strength, maintains bond under heavy load
Application Related
Simple one hour application eliminates dig-outs and multiple days construction. This reduces traffic flow inconvenience and potential construction liability.
Simple application procedures allow non-paving professionals to provide a surface equal to or better than the best application of asphalt or concrete.
Application can be done with simple tools, eliminating the need for expensive dig-out tools and heavy machinery.
|  | FLOMIX™ and FLEXSET™: Common Applications
Driveways, Sidewalks, and Parking Lots – Repairs to these structures are usually done either as individual fixes to retain the serviceability of the structure, or as part of a resurfacing of the structure. When a patch is made as part of an individual fix, the benefit is that the surface will be available within an hour and will be superior to the original surface. When the patch is part of a total resurfacing, the benefit is that the surfacing contractor doesn’t have to wait for concrete, or a hot-mix company to do the patch. Repairs can be seal coated or striped over quickly.
Roads and Highways – FloMix is used to repair asphalt potholes, alligatoring, cracking, pavement cuts, and surface compaction (ruts). FlexSet is used to repair concrete cracks, breakup, trip hazards, utility cuts, and joint openings. The materials quick repair cycle means roads or highways need only be closed for hours, not days.
Bridges – Bridges, because of their exposed nature (open to ambient temperatures on top and bottom) are subject to greater wear and maintenance than normal road bed. The transitions to the bridge structure are points of wear that have possible bonding problems with different materials. FloMix and FlexSet provide quick repairs that handle the heavy wear, and provide superior bonding to all materials (including steel fixtures).
Airports – Airports suffer from extremely heavy loads. Highways are regulated to have vehicle loads no greater than approximately 100,000 lbs. Airports, on the other hand, routinely handle airplanes exceeding 750,000 lbs. The FloMix and FlexSet products were initially designed for NATO runways to meet these types of loads. Airport runways are also critical resources that are hard to close to traffic. The quick repair cycle means runways and taxiways need only be closed for hours, not days.
Floor and Surface Restoration – Warehouse floors can develop damage and wear from forklifts and heavy machinery. FlexSet and FloMix can easily repair pitting, cracks, spalls, and trip-hazards. The self-leveling material will restore any floor surface to a smooth, attractive, and worker-safe condition.
Maintenance, man-hole covers – Man-hole covers and other steel structures incorporated into the paving surface provide special problems. Asphalt and Concrete normally separate from the steel with temperature cycles. Water can then get between the paving and steel, causing further expansion and cracking of the paving. FloMix and FlexSet provide a permanent seal, and are impervious to water, fuels, oils, and solvents.
Toxic, chemical, and food service handling areas – Chemical handling areas provide special problems for repairs. Because asphalt and cement can absorb chemical spills, FloMix and FlexSet’s impermeability to chemicals make it a superior repair solution. Also ideal for food preparation and storage areas, including sub-zero repair applications.
|  | Each Complete 5-Gal KIT (56 pounds) Includes Everything You Need To Complete The Repair
View this brief video to see how simple FloMix Pourable Asphalt and FlexSet Rapid Concrete repair and restoration materials are to use
 Video: How to (Broadband) Video: How to (Dial-up)
Video: Before & After Photos
- Save time and money!
- No special tools or skills needed
- D.O.T. Approved repair process
- Traffic ready in as little as one hour
- View our Current Specials
- Quantity Discounts available on all our repair materials and tools
|
|
|
|
Featured Products For July |
|
|
|
|
|
|
| 0 items |
|
|
|
|
|
|
|
|
Bestsellers |
|
|
|
Languages |
|
|
|
|
|
Enter your Email to Subscribe |
|
|
|
Currencies |
|
|
|
Resources |
|
|
|
Catalog RSS Feed
