Repairs can be completed in a matter of minutes, using only 4 simple steps.
ALL NESCESSARY COMPONENTS ARE INCLUDED IN EACH PRE-MEASURED KIT

FLOMIX™ Flowable Asphalt, and FLEXSET™ Rapid Concrete work similarly*
* FLOMIX™ Flowable Asphalt is illustrated below.

STEP 1: The area is prepped by simply sweeping (or using a leaf blower or compressed air) to remove loose dirt and debris. Clean, dry, angular aggregate may be added for deep pothole repair.

STEP 2: Mix A, then B polymer components with specially formulated, coated aggregate.

STEP 3: Mixed product in the form of a pourable slurry is laid down in a matter of seconds and its thermal viscous reaction is already working.
*Use of tape/paper is optional if you desire to “shape” your final repair.

STEP 4: Included Topping sand is applied to enhance traction and aesthetics.
Ready for Traffic!
In about 1 hour, the area is open to traffic and fully restored. When complete, the repair blends in visually with the surrounding pavement. |