Quantity 1-4 5-63 64+ 
Price for each $603.00  $429.00  $419.00 $399.00
Your savings 29% 31% 34%

FASTPATCH CF Crack Filler Gray 600mL 12-Pack
[1026116-600](FREE Shipping)

FASTPATCH CF Crack Filler Gray 600mL 12-Pack
[1026116-600](FREE Shipping)

Quantity 1-4 5-63 64+ 
Price for each $603.00  $429.00  $419.00 $399.00
Your savings 29% 31% 34%

FASTPATCH CF Crack Filler Gray 600mL 12-Pack 1

Fast-setting Crack Filler for Concrete

FASTPATCH CF (Crack Filler) is a rapid setting two-part polyurethane designed for concrete repair. It is designed for damaged concrete surfaces where cracks, spalls and edge breaks must be filled in to extend the life of the concrete. Its combination of fast set, high strength and low viscosity make it ideal for areas which must be brought to level. It may be left uncoated after cure, or standard concrete coatings may be applied over it.

WHERE TO USE FASTPATCH CF

  • Floors – Cracked or spalled concrete
  • Joints – Broken corners and edges
  • Use before concrete Overlays or Coatings – Accepts most concrete surface primers
  • Low Temperature Applications – Cures on cold substrates

FEATURES AND BENEFITS

  • Superior Adhesion–tight bond to substrate without primer
  • Very Low Viscosity-penetrates and levels on surfaces
  • Sets in Minutes–rapid return to service
  • Toughness–does not become brittle with age
  • Ease of Application–can be static mixed or manually applied
  • Cures at Low Temperatures - Year round use

FASTPATCH CF is:

  • Low Viscosity Polyurethane
  • Self Leveling - Gel time 2-4 minutes at 70°F (21°C)
  • Set Time 5-20 minutes (temperature dependent)
  • Low temperature repair
  • Superior adhesion strength
  • Low moisture sensitivity

FASTPATCH CF is also available in a 1-Gallon Kit (231 in³) for bulk applications. Contact Us for more product details.


Quantity
Back
Description

Fast-setting Crack Filler for Concrete

FASTPATCH CF (Crack Filler) is a rapid setting two-part polyurethane designed for concrete repair. It is designed for damaged concrete surfaces where cracks, spalls and edge breaks must be filled in to extend the life of the concrete. Its combination of fast set, high strength and low viscosity make it ideal for areas which must be brought to level. It may be left uncoated after cure, or standard concrete coatings may be applied over it.

Case CONTENTS:

  • (12) Polymer Part A + Polymer Part B Dual Cartridges
  • (12) Static Mixing Tips
  • Instructions
  • MSDS

PACKAGING: Case of (12) 600mL Dual Cartridges (12-Pack).
COLORS: Gray
UNIT VOLUME: 600-mL per dual-cartridge. (300mL x 300mL)
YIELD: 600-mL Cartridge = 36.61in³.
RATIO: 1 to 1 (Resin to Iso).

Instructions

Before handling, you should become familiar with the Material Safety Data Sheet (MSDS) regarding the risks and safe use of this product. The MSDS is included within the product packaging. For a copy of the MSDS please Contact Us with your request.

View or download the Application Instructions: FastPatch-CF_Crack-Filler-TDS-Rev_2-1.pdf  Application Instructions


GENERAL CARTRIDGE INSTRUCTIONS
- ALWAYS WEAR SAFETY GLASSES AND GLOVES WHILE HANDLING CARTRIDGES.
- FOR BEST RESULTS: STORE CARTRIDGES IN UPRIGHT POSITION. CONDITION CARTRIDGES TO ≥ 60°F (15°C) BEFORE USING.

  1. REMOVE NUT AND CAP.
  2. SECURE MIX-TUBE TO CARTRIDGE AND TIGHTEN NUT, BE SURE TO AVOID CROSS-THREADING. MIX TUBE END MAY BE CUT FOR GREATER EXTRUSION RATE (OPTIONAL).
  3. LOAD CARTRIDGE INTO DISPENSER; KEEP CARTRIDGE UPRIGHT.
  4. BEGIN DISPENSING AND FILL MIX-TUBE WITH MATERIAL (KEEP UPRIGHT). VISUALLY INSPECT MATERIAL IN MIX-TUBE TO ENSURE PROPER MIXING.
  5. TILT DOWN AND DISPOSE OF INITIAL PORTION (5 PUMPS OR 3 SECONDS). CONTINUE DISPENSING INTO APPLICATION AREA. KEEP CARTRIDGE POINTED DOWN AND DISPENSE AT A CONSTANT RATE UNTIL FINISHED. AVOID REPEATED TRIGGERING ON AND OFF.
  6. TO RE-USE PARTIALLY DISPENSED CARTRIDGE: HOLD CARTRIDGE UPRIGHT. REMOVE MIX-TUBE AND WIPE CARTRIDGE CLEAN. REPLACE CAP AND NUT. NEXT APPLICATION WILL REQUIRE NEW MIX-TUBE.

Video

FastPatch Cartridge Dispensing Techniques: Watch the video to learn how to correctly load and dispense FastPatch cartridge products for concrete repair and asphalt repair applications.


If you have any questions on how to properly load and use FastPatch cartridges, please Contact Us for assistance.

Technical Data

View or download the Technical Data Sheet: FastPatch-CF_Crack-Filler-TDS-Rev_2-1.pdf Technical Data Sheet

SHELF LIFE

1 year when properly stored.

STORAGE

Store and ship this product in a clean, dry, low-humidity, shaded or covered environment at 60-90 F.

Warranty

DISCLAIMER OF WARRANTY
TEST RESULTS ARE TO BE CONSIDERED AS REPRESENTATIVE OF CURRENT PRODUCTION AND SHOULD NOT BE TREATED AS SPECIFICATIONS. WHILE ALL THE INFORMATION PRESENTED IN THIS DOCUMENT IS BELIEVED TO BE RELIABLE AND TO REPRESENT THE BEST AVAILABLE DATA ON THESE PRODUCTS, NO GUARANTEE, WARRANTY, OR REPRESENTATION IS MADE, INTENDED, OR IMPLIED AS TO THE CORRECTNESS OR SUFFICIENCY OF ANY INFORMATION, OR AS TO THE SUITABILITY OF ANY CHEMICAL COMPOUNDS FOR ANY PARTICULAR USE, OR THAT ANY CHEMICAL COMPOUNDS OR USE THEREOF ARE NOT SUBJECT TO A CLAIM BY A THIRD PARTY FOR INFRINGEMENT OF ANY PATENT OR OTHER INTELLECTUAL PROPERTY RIGHT. EACH USER SHOULD CONDUCT A SUFFICIENT INVESTIGATION TO ESTABLISH THE SUITABILITY OF ANY PRODUCT FOR ITS INTENDED USE. PROPER APPLICATION IS THE RESPONSILBITY OF THE USER. AS WITH ANY PRODUCT THE USE OF THE THIS PRODUCT IN A GIVEN APPLICATION MUST BE TESTED (INCLUDING BUT NOT LIMITED TO FIELD TESTING) IN ADVANCE BY THE USER TO DETERMINE SUITIBILITY. TESTING IS THE REQUIREMENT OF BOTH ENGINEERS AND CONTRACTORS ALIKE. WVCO DOES NOT WARRANT THE APPLICATION UNDER ANY OR ALL CIRCUMSTANCES.

Shipping
This item includes FREE Shipping

Pallet Qty.: 64 cases, Unit Volume: Case (12)

To quickly preview an accurate shipping quote for your order, including quantity discounts, add all of your selected item(s) to your Shopping Cart, enter your Zip Code into the form and click the Get Quotes button.

Reccommended Accessories for: FASTPATCH CF Crack Filler Gray 600mL 12-Pack [1026116-600]

Manual 1:1 Dual Cartridge Gun 300mL x 300mL
Manual 1:1 Dual Cartridge Gun 300mL x 300mL
Reviews

Be the first to review this product!

First Name:  
Last Name:  (Optional)
Your Review:  BAD GOOD

Ask a question about: FASTPATCH CF Crack Filler Gray 600mL 12-Pack [1026116-600]
  * Required information
Your Name: *
Your E-Mail: *
Company:
State/Province:
Telephone:  
Your Question:
What is the sum of 1 and 3 ? *

Twitter
Reddit
Pintrest
Google
Facebook
Related Products
Related Categories
Related Manufacturers