Quantity 1-5 6-63 64+ 
Price for each $539.00  $384.00  $369.00 $359.00
Your savings 29% 32% 33%

FASTPATCH Road Reflector Adhesive (CC) Black 450mL 12-Pack
[1026268-450](FREE Shipping)

FASTPATCH Road Reflector Adhesive (CC) Black 450mL 12-Pack
[1026268-450](FREE Shipping)

Quantity 1-5 6-63 64+ 
Price for each $539.00  $384.00  $369.00 $359.00
Your savings 29% 32% 33%

FASTPATCH Road Reflector Adhesive (CC) Black 450mL 12-Pack 1FASTPATCH Road Reflector Adhesive (CC) Black 450mL 12-Pack 2FASTPATCH Road Reflector Adhesive (CC) Black 450mL 12-Pack 3FASTPATCH Road Reflector Adhesive (CC) Black 450mL 12-Pack 4FASTPATCH Road Reflector Adhesive (CC) Black 450mL 12-Pack 5FASTPATCH Road Reflector Adhesive (CC) Black 450mL 12-Pack 6FASTPATCH Road Reflector Adhesive (CC) Black 450mL 12-Pack 7FASTPATCH Road Reflector Adhesive (CC) Black 450mL 12-Pack 8FASTPATCH Road Reflector Adhesive (CC) Black 450mL 12-Pack 9FASTPATCH Road Reflector Adhesive (CC) Black 450mL 12-Pack 10FASTPATCH Road Reflector Adhesive (CC) Black 450mL 12-Pack 11

Reflector Button Adhesive (RBA) is a cold-applied, flexible adhesive designed for roadway markers and reflectors. It chemically cures to form a strong bond within minutes, keeping the buttons from moving on both hot and cold roadway surfaces. Furthermore, RBA is safe to use since there is no melting involved and therefore no harmful fumes. RBA is easy to apply and dispense using either individual cartridges or bulk containers. RBA meets ASTM D4280 and state requirements for Flexible Adhesive for Pavement Markers.

WHERE TO USE FASTPATCH REFLECTOR BUTTON ADHESIVE (RBA)

  • Vertical reflector placement
  • Horizontal reflector placement - Permanent infrastructure or repair
  • K-rail & Walls, Parking Decks, Bridge Decks
  • Anywhere a permanent reflector placement is desired

FASTPATCH REFLECTOR BUTTON ADHESIVE (RBA) FEATURES AND BENEFITS

  • Quick Set - as little as 20 minute return to service.
  • Highly Elastic - Unlike epoxies, remains flexible when exposed to heat and UV light.
  • Non-Sag - applied vertically or in non-level applications.
  • Remains flexible at freezing temperatures - does not harden.
  • Passes Hockman Type-12.5 Test - dynamically stable.
  • 100% Solids, 0 VOC - Environmentally friendly.

FASTPATCH REFLECTOR BUTTON ADHESIVE (RBA) is:

  • ASTM D4280 Section A1
  • Meets CalTrans Section 85 requirements
  • Fast setting
  • Superior adhesion to concrete
  • FASTPATCH REFLECTOR BUTTON ADHESIVE (RBA) outperforms both silicone and epoxies in terms of adhesion, chemical resistance, and UV stability.

FASTPATCH REFLECTOR BUTTON ADHESIVE (RBA) is also available for Metered Dispensing in 15-Gallon Pail Kits and 150-Gallon Drum Kits. Contact Us for more details.


Quantity
Back
Description

FASTPATCH REFLECTOR BUTTON ADHESIVE (RBA) (Non-Sag) is a highly flexible, two-component, rapid setting, polyurethane-based adhesive for bonding road reflectors on both horizontal and vertical surfaces.

Reflector Adhesive for vertical, horizontal, and overhead applications. Gel Time = 5 min. 2:1 Vol.

Case CONTENTS:

  • (12) Polymer Part A + Polymer Part B Dual Cartridges
  • (12) Static Mixing Tips
  • Instructions
  • MSDS

PACKAGING: Case of (12) 450 mL Dual Cartridges (12-Pack).
COLORS: Black. Colors Available Upon Request
UNIT VOLUME: 450-mL (300x150) per dual-cartridge.
YIELD: 450-mL Cartridge = 27.5in³.
SET TIME = 20 min.
RATIO: 2 to 1 (Resin to Iso).

Instructions

Before handling, you should become familiar with the Material Safety Data Sheet (MSDS) regarding the risks and safe use of this product. The MSDS is included within the product packaging. For a copy of the MSDS please Contact Us with your request.

View or download a FastPatch Reflecor Adhesive Field Report: FieldReport_Reflector_Adhesive_NS.pdf Field Report

RBA Road Reflector Adhesive Instructions

1. Wipe surface clean with a towel where reflector will be placed.
2. Dispense 5ml on vertical wall or 15ml on Horizontal surface or K-rail.
3. Firmly press reflector into RBA Reflector Adhesive.
4. Adjust angle of reflector to provide directional visual cue.

Reflector Application Yield using common PCBM 912 Reflectors:
a. 1 450ml cartridge for 78 reflectors on vertical wall.
b. 1 450ml cartridge for 30 reflectors on horizontal, K-rail.
c. 1 450ml cartridge for 17 4" (10-cm) traffic dots.


GENERAL CARTRIDGE INSTRUCTIONS
- ALWAYS WEAR SAFETY GLASSES AND GLOVES WHILE HANDLING CARTRIDGES.
- FOR BEST RESULTS: STORE CARTRIDGES IN UPRIGHT POSITION. CONDITION CARTRIDGES TO ≥ 60°F (15°C) BEFORE USING.

  1. REMOVE NUT AND CAP.
  2. SECURE MIX-TUBE TO CARTRIDGE AND TIGHTEN NUT, BE SURE TO AVOID CROSS-THREADING. MIX TUBE END MAY BE CUT FOR GREATER EXTRUSION RATE (OPTIONAL).
  3. LOAD CARTRIDGE INTO DISPENSER; KEEP CARTRIDGE UPRIGHT.
  4. BEGIN DISPENSING AND FILL MIX-TUBE WITH MATERIAL (KEEP UPRIGHT). VISUALLY INSPECT MATERIAL IN MIX-TUBE TO ENSURE PROPER MIXING.
  5. TILT DOWN AND DISPOSE OF INITIAL PORTION (5 PUMPS OR 3 SECONDS). CONTINUE DISPENSING INTO APPLICATION AREA. KEEP CARTRIDGE POINTED DOWN AND DISPENSE AT A CONSTANT RATE UNTIL FINISHED. AVOID REPEATED TRIGGERING ON AND OFF.
  6. TO RE-USE PARTIALLY DISPENSED CARTRIDGE: HOLD CARTRIDGE UPRIGHT. REMOVE MIX-TUBE AND WIPE CARTRIDGE CLEAN. REPLACE CAP AND NUT. NEXT APPLICATION WILL REQUIRE NEW MIX-TUBE.
Technical Data

Flexible Repair. Set Time = 20 min. 2:1 Vol.

View or download the Technical Data Sheet: FastPatch_RBA_TechnicalDataSheet.pdf Technical Data Sheet

SHELF LIFE

1 year when properly stored.

STORAGE

Store and ship this product in a clean, dry, low-humidity, shaded or covered environment at 60-90F.

AVAILABLE PACKAGING:
450-mL Cartridge
5-Gallon Buckets
50-Gallon Drums

Warranty

DISCLAIMER OF WARRANTY
TEST RESULTS ARE TO BE CONSIDERED AS REPRESENTATIVE OF CURRENT PRODUCTION AND SHOULD NOT BE TREATED AS SPECIFICATIONS. WHILE ALL THE INFORMATION PRESENTED IN THIS DOCUMENT IS BELIEVED TO BE RELIABLE AND TO REPRESENT THE BEST AVAILABLE DATA ON THESE PRODUCTS, NO GUARANTEE, WARRANTY, OR REPRESENTATION IS MADE, INTENDED, OR IMPLIED AS TO THE CORRECTNESS OR SUFFICIENCY OF ANY INFORMATION, OR AS TO THE SUITABILITY OF ANY CHEMICAL COMPOUNDS FOR ANY PARTICULAR USE, OR THAT ANY CHEMICAL COMPOUNDS OR USE THEREOF ARE NOT SUBJECT TO A CLAIM BY A THIRD PARTY FOR INFRINGEMENT OF ANY PATENT OR OTHER INTELLECTUAL PROPERTY RIGHT. EACH USER SHOULD CONDUCT A SUFFICIENT INVESTIGATION TO ESTABLISH THE SUITABILITY OF ANY PRODUCT FOR ITS INTENDED USE. PROPER APPLICATION IS THE RESPONSILBITY OF THE USER. AS WITH ANY PRODUCT THE USE OF THE THIS PRODUCT IN A GIVEN APPLICATION MUST BE TESTED (INCLUDING BUT NOT LIMITED TO FIELD TESTING) IN ADVANCE BY THE USER TO DETERMINE SUITIBILITY. TESTING IS THE REQUIREMENT OF BOTH ENGINEERS AND CONTRACTORS ALIKE. WVCO DOES NOT WARRANT THE APPLICATION UNDER ANY OR ALL CIRCUMSTANCES.

Shipping
This item includes FREE Shipping

Pallet Qty.: 64 cases, Unit Volume: Case (12)

To quickly preview an accurate shipping quote for your order, including quantity discounts, add all of your selected item(s) to your Shopping Cart, enter your Zip Code into the form and click the Get Quotes button.

Reccommended Accessories for: FASTPATCH Road Reflector Adhesive (CC) Black 450mL 12-Pack [1026268-450]

Manual 2:1 Dual Cartridge Gun 300mL x 150mL
Manual 2:1 Dual Cartridge Gun 300mL x 150mL
Reviews

Be the first to review this product!

First Name:  
Last Name:  (Optional)
Your Review:  BAD GOOD

Ask a question about: FASTPATCH Road Reflector Adhesive (CC) Black 450mL 12-Pack [1026268-450]
  * Required information
Your Name: *
Your E-Mail: *
Company:
State/Province:
Telephone:  
Your Question:
What is the sum of 4 and 8 ? *


Customers who bought this product also purchased
Manual 1:1 Dual Cartridge Gun 300mL x 300mL
Manual 1:1 Dual Cartridge Gun 300mL x 300mL
Eggbeater Style Mixer
Eggbeater Style Mixer
Twitter
Reddit
Pintrest
Google
Facebook
Related Products
Related Categories
Related Manufacturers